高级检索

基于位置感知双向交叉注意力的变转速工况滚动轴承故障诊断方法

Coordinate-Guided Bidirectional Cross-attention for Rolling Bearing Fault Diagnosis under Variable Operating Conditions

  • 摘要: 针对变转速滚动轴承故障诊断中单一特征表征能力有限、异构特征间互补信息交互不充分的问题,本文提出一种基于位置感知双向交叉注意力网络(CGBCA)的故障诊断方法。首先,构建紧凑的时序-空间双分支特征提取模块,分别提取一维时序信号和二维时频图特征,以控制模型参数量并降低少样本条件下的过拟合风险。其次,设计位置感知双向交叉注意力模块,利用条件位置编码建模Token间的局部邻域关系,并将坐标偏置融入相似度计算,显式约束注意力权重分配,从而增强两类特征的双向交互与互补融合。最后,在变转速轴承数据集上对CGBCA模型进行实验验证。结果表明,CGBCA的平均诊断准确率为98.40%±0.31%,相较于仅引入条件位置编码的模型和CNN-Transformer交叉注意力模型(CTCA)的模型,分别提高2.26和3.38个百分点。上述结果验证了所提方法在异构特征深度融合与跨特征交互方面的有效性,可为变转速复杂工况下的轴承故障诊断提供可靠的技术支持。

     

    Abstract: To address the limited representation capability of individual features and the insufficient interaction of complementary information between heterogeneous features in rolling bearing fault diagnosis under variable-speed conditions, a fault diagnosis method based on a position-aware bidirectional cross-attention network (CGBCA) was proposed. First, a compact temporal-spatial dual-branch feature extraction module was constructed to extract features from one-dimensional temporal signals and two-dimensional time-frequency representations, respectively. This design controlled the model parameters and reduced the risk of overfitting under few-shot conditions. Second, a position-aware bidirectional cross-attention module was designed. Conditional positional encoding was utilized to model the local neighborhood relationships of tokens, and coordinate biases were incorporated into the similarity computation. This explicitly constrained the attention weight allocation, thereby enhancing the bidirectional interaction and complementary fusion between the two types of features. Finally, the proposed CGBCA model was experimentally evaluated on a variable-speed rolling bearing dataset. The results showed that CGBCA achieved an average diagnostic accuracy of 98.40% ±0.31%, which is 2.26 and 3.38 percentage points higher than those of the CPE-only model and the CNN-Transformer cross-attention model (CTCA), respectively. These results fully demonstrated the effectiveness of the proposed method in the deep fusion of heterogeneous features and cross-feature interaction, providing reliable technical support for rolling bearing fault diagnosis under complex variable-speed operating conditions.

     

/

返回文章
返回